5in1 Controller ZigBee 3.0 and MiBoxer compatible
5in1 controller compatible with ZigBee 3.0 such as Philips Hue®, Osram Lightify®, Amazon Echo Plus as well as MiLight RGBCCT remote controls / wall switches
This new generation of 5in1 controller works with ZigBee 3.0 and is therefore compatible with many popular ZigBee hubs/gateways, please refer to the compatibility notes.
Furthermore it can be controlled with the well-known RGBCCT remote controls and wall switches from MiLight/MiBoxer.
This controller provides a control for various externally controllable LED products in one.
You can use this controller to control the latest generation of LED strips with 5in1 chips, 4 chip, CCT or single color. So you can connect any LED lighting with the common 12-24VDC as well as 48VDC or 54VDC and set the controller accordingly and be more flexible. If you change your mind later or operate the device with a different lighting, just reset the color range and you don't need another or new controller.
This controller can control all common types of LED products that operate on a 12-24-48-54 volt basis. This makes it suitable for LED strips, LED recessed spotlights, LED outdoor or pool lighting.
Through the ZigBee lighting control, the LED lighting is turned on/off and dimmed, you can also use the remote controls / wall switches of MiLight / MiBoxer (RGBCCT variants).
Notes on compatibility
The controller is compatible with most ZigBee ZLL and ZigBee 3.0 gateways.
It was tested with Philips Hue®, Osram Lighify®, Amazon Echo Plus.
Maximum power at max. 5 amps /10 amps
You can operate a maximum of 270W on the controller at 36-48-54VDC,
At 24VDC and 12VDC and 10A you can operate up to 240W and 120W respectively.