GLEDOPTO GL-C-611WL Elite 5D-EXMU – PWM 5in1 RGBCCT WLED

GLEDOPTO GL-C-611WL Elite 5D-EXMU – PWM 5in1 RGBCCT WLED

SKU: 7027
GTIN: 4260567175979
HAN: GL-C-611WL
Category: WLED - digital lighting
Manufacturers: GLEDOPTO

5-in-1 PWM controller for analog constant-voltage LED strips
Supports RGBCCT, RGBW, RGB, CCT and single-color dimming
Wide DC input range from 5V to 48V
Maximum total output current of 15A
Maximum output current of 10A per channel
WLED control through app or browser
Wi-Fi and preconfigured Ethernet connectivity
Integrated microphone for audio-reactive effects
Additional GPIO 13 interface for DIY functions
Physical button for power, color change and reset

34,99 €

incl. 19% VAT , plus

Available immediately
Delivery time: 2 - 3 Workdays (DE - int. shipments may differ)

Description
PDF (2)

GLEDOPTO GL-C-611WL Elite 5P-EXMU PWM 5-in-1 WLED Controller

The GLEDOPTO GL-C-611WL Elite 5P-EXMU is a versatile PWM WLED controller for analog constant-voltage LED strips. Its five configurable output channels support RGBCCT, RGBW, RGB, CCT and single-color dimming applications, while Wi-Fi, Ethernet and an integrated microphone provide flexible smart lighting control.

GL-C-611WL · Elite 5P-EXMU · PWM 5-in-1 WLED Controller

5-in-1 PWM output DC 5V–48V 15A total output Wi-Fi and Ethernet

01 · 5-IN-1

Five LED strip configurations

Configure the controller for RGBCCT, RGBW, RGB, tunable white CCT or single-color dimmable LED strips.

02 · WLED

App and browser control

Adjust brightness, colors, white tones and effects through the WLED app, WLED Native or a browser-based interface.

03 · NETWORK

Wi-Fi and Ethernet operation

Use wireless control through the local Wi-Fi network or connect the controller to a router through Ethernet.

04 · AUDIO

Audio-reactive lighting

The integrated PDM microphone can be activated in WLED for effects that respond dynamically to music and ambient sound.

Flexible PWM control for analog LED strips

The GL-C-611WL combines five PWM output channels with WLED software, wired and wireless networking, microphone support and a dedicated DIY GPIO port.

Five configurable PWM output channels for constant-voltage LED strips
Supports RGBCCT, RGBW, RGB, CCT and single-color dimmer configurations
Wide input range of DC 5V, 12V, 24V, 36V or 48V
Maximum total output current of 15A
Maximum output current of 10A per channel
Wi-Fi configuration through the WLED-AP hotspot
Preconfigured Ethernet interface for wired network control
Integrated microphone for WLED AudioReactive functions
GPIO 13 expansion interface for compatible DIY functions
Physical function button for switching, color selection and reset

Configuration Overview and Application Recommendation

The controller can be configured for five different PWM LED strip types. Select the operating mode that matches the channel layout and functions of the connected strip.

Configuration	Output functions	Typical application
RGBCCT	Red, green, blue, warm white and cool white	Complete color and tunable-white installations requiring decorative RGB light and adjustable white tones
RGBW	Red, green, blue and one white channel	Color lighting with an additional dedicated white channel
RGB	Red, green and blue	Decorative color effects, accent lighting and ambient installations
CCT	Warm white and cool white	Tunable-white lighting with adjustable color temperature
Dimmer	Single-color brightness control	Dimmable white or monochrome constant-voltage LED strips

Note: Select the WLED hardware configuration according to the electrical layout of the connected LED strip. Do not connect a strip type that does not match the selected channel assignment.

Typical Applications

RGBCCT ambient lighting Combine vivid colors with adjustable warm-to-cool white lighting in living rooms, bedrooms or entertainment spaces.

RGB accent lighting Create colored effects behind furniture, under cabinets, in display areas or around architectural details.

Tunable-white lighting Adjust warm and cool white tones for task lighting, relaxation or changing daytime requirements.

Single-color dimming Control the brightness of white or monochrome constant-voltage LED strips.

Audio-reactive installations Synchronize compatible WLED effects with music and ambient sound through the integrated microphone.

DIY control projects Use the extended GPIO 13 signal interface for compatible buttons, switches or custom functions.

WLED control with Wi-Fi, Ethernet and AudioReactive support

The controller creates a WLED-AP hotspot for initial setup. After entering the local Wi-Fi credentials, it can be controlled through WLED Native or through the browser-based WLED interface.

The Ethernet interface is configured for GLEDOPTO operation and can be used after connecting the controller to a compatible router. The integrated microphone can be enabled through the AudioReactive user module.

WLED · Wi-Fi · Ethernet · AudioReactive

Technical Data – GLEDOPTO GL-C-611WL

Manufacturer	GLEDOPTO
Model	GL-C-611WL
Product designation	Elite 5P-EXMU PWM 5-in-1 WLED Controller
Product type	PWM controller for analog constant-voltage LED strips
Supported strip configurations	RGBCCT, RGBW, RGB, CCT and Dimmer
Main input voltage	DC 5V, 12V, 24V, 36V or 48V
Maximum total output current	15A
Maximum output current per channel	10A
USB Type-C input voltage	5V
Maximum USB Type-C input current	3A
Operating temperature	-20°C to 45°C
PWM output terminals	V+, IO18, IO16, IO12, IO4 and IO2
Extended DIY GPIO	IO13
Control software	WLED
Wireless connection	Wi-Fi
Wired connection	Ethernet
Initial Wi-Fi hotspot	WLED-AP
Initial hotspot password	wled1234
Integrated microphone	Yes
Microphone type	Generic PDM
Microphone I2S SD pin	32
Microphone I2S WS pin	15
Function button GPIO	GPIO 17
Function button operation	Short press: power on/off; hold for 1 second: change color; hold for 10 seconds: reset and activate WLED-AP
Factory-installed fuse	20A
Included spare fuse	5A
Delivery scope	Spare 5A fuse; additional contents not specified

Note: A separate constant-voltage DC power supply is required. Its voltage must match the connected LED strip, and its current capacity must be selected according to the total load. The total controller output must not exceed 15A, even when individual channels are rated for up to 10A.

Installation Notes

Disconnect the power supply before connecting or changing any wiring.
Use only a constant-voltage LED strip compatible with the selected PWM configuration.
Connect the common positive conductor to V+ and the individual channels to the assigned PWM outputs.
Select a power supply voltage that matches the operating voltage of the connected LED strip.
Do not exceed the maximum total output current of 15A.
Do not exceed the maximum output current of 10A on any individual channel.
Use suitable cable cross-sections and fusing for the expected current load.
Check all terminals for correct polarity and secure contact before switching on the power.
Do not install the controller in direct sunlight, damp areas or environments exposed to excessive heat.
Avoid metal-shielded installation locations and strong magnetic fields because they may reduce wireless range.
Configure the correct strip type and channel assignment under LED Preferences and Hardware Setup in WLED.
Restart the controller after configuring the microphone function.

Frequently Asked Questions about the GL-C-611WL

Which LED strips can the GL-C-611WL control?

The controller supports analog constant-voltage RGBCCT, RGBW, RGB, CCT and single-color dimmable LED strips. It is a PWM controller and is not intended as a data controller for individually addressable pixel strips.

Which input voltages are supported?

The main input supports DC 5V, 12V, 24V, 36V and 48V. The selected input voltage must match the rated voltage of the connected LED strip.

What is the maximum output current?

The maximum total output current is 15A. Each individual channel supports up to 10A, but the combined output of all active channels must remain within the 15A total limit.

Can the controller be operated through Ethernet?

Yes. The Ethernet function is preconfigured. Connect the controller to a router with an Ethernet cable and select Gledopto as the Ethernet type in the WLED Wi-Fi Setup menu.

Does the controller support music-reactive effects?

Yes. The integrated Generic PDM microphone can be used with the WLED AudioReactive user module. After saving the microphone configuration, restart the controller to activate it.

What is GPIO 13 used for?

GPIO 13 is an extended signal interface for compatible DIY functions. It can be configured for supported push buttons or switches within the WLED settings.

Is a separate power supply required?

Yes. A suitable constant-voltage DC power supply is required. Its voltage must match the LED strip, and its current capacity must be sufficient for the connected load.

How can the controller be reset?

Press and hold the Function button for approximately 10 seconds to reset the controller and activate the WLED-AP hotspot. A factory reset can also be performed through Security and Updates in the WLED interface.

What is included with the controller?

A spare 5A fuse is included. Additional delivery contents are not specified.

Product safety information

Manufacturer information:

GLEDOPTO CO., LTD
F2 Bldg #1, Wanda Industrial Park, No.56 Baolong Hi-Tech Avenue, Baolong street
Shenzhen, China, 518116
sales@gledopto.com
https://gledopto.com

Responsible person:

LED Trading
Schöneicher Straße 42
Brandenburg
Schöneiche, Deutschland, 15566
info@led-trading.de
https://www.led-trading.de